The polyester net produced by XiaHua has the characteristics of acid and alkali resistance, wear resistance, long service life and high breaking strength. The tension value of the polyester net is obviously higher than that of ordinary wire mesh, the polyester net has good stability and the elongation is very small .

Xia Hua production of polyester network using high-quality fiber raw materials by advanced equipment, technology organizations production. Polyester mesh surface after special treatment, can withstand the high pressure of the number of friction, the polyester network has a high degree of security and the number of printing-resistant, weaving methods are plain and twill. Xia production of polyester network by many domestic enterprises procurement, the company has also been regarded as the industry's outstanding product quality representatives. The polyester network can be widely used in urban sewage treatment plants, chemical fertilizers, textile industry, metallurgy, power plants, chemical and other industries.

In addition, for the printing industry, the polyester network tension in the printing process to maintain a high degree of stability, to ensure the printing quality and screen version of the service life. The maximum mesh can reach 500 mesh / cm (25 microns / cm). The thickness of the polyester mesh, the opening and the wire diameter are controlled within the minimum range. It is the best choice for high-precision line printing and dot printing.

Instructions:

1, open the mesh belt packaging, the first should check whether the product size and use of equipment specifications and models in line.

2, the use of mesh belt to adjust the roller with the network to a minimum position

3, the use of net belt before the inspection and correction of the parallelism of the roller, guide roller parallel to prevent deviation from the network, discount. To ensure flexible operation of the various rollers to avoid the phenomenon of stuck to wear mesh surface. And the part of the surface contact with the network must ensure smooth, no sharp burr, to prevent the phenomenon of fragmentation or local wear belt. Other devices such as net belt cleaning device, deviation adjustment device should be used normally, flexible.

4, the net to bring the machine to run slowly when the direction of the introduction of the direction of the arrow on the line and running in the same direction, the face is positive, and then inserted in sequence through the core.

5, will be adjusted with the location of the mesh belt, and then with the tension of the net belt transferred to the required tension.

6, and finally check the network belt and equipment problems first run at a slower speed a few weeks, until there is no problem in the operation to give sufficient tension, can be normal operation.

3, paper-making network

Paper forming network divided into woven series, four brown, five brown, seven brown, eight brown, sixteen brown, twenty-four brown series. Can be divided into single-layer network, double-layer network, two and a half and three-tier network.