- In 2024, F...2024/12/13
- Changzhou ...2024/12/13
- Changzhou ...2024/11/28
- Changzhou ...2024/11/28
- Changzhou ...2024/11/22
One of the accessories of the filter bag belongs to the environmental protection equipment is an efficient dust filter material. The dust collector filter bag is a polyester short fiber, PPS fiber, PP polypropylene, aramid fiber, allow fiber, and the like, the service life is generally 2 - 4 years, good breathable, high dust collectivity, easy gray gray, dust removal efficiency can reach 98.99%.
Because of its outer shell, it is often leaking, so that the filter bag chamber gas temperature is lower, the filter bag will be tidy, causing the dust not loose, but sticks to the filter bag, block the fabric hole, constitute The clear gray failed, so that the dust removal was too large, and it could not continue to work. Some pouches could not be dustped. It is necessary to prevent consecutive, it is necessary to keep the gas in the dust collector and its system is higher than its 25 ~ 35 ° C (such as the temperature of the kiln mood of 58 ° C, the operating temperature should be above 90 ° C) to ensure A good application effect of the filter bag. The method is as follows:
1) Reduce the wind. The air leakage of the dust collector body part of the slit is controlled by 3.5% or less. In the dust collector system, the air leakage of the process equipment such as the ball mill of the ball mill, the air leakage of the closed ash valve under the dust collector, and the pipelines are often neglected by the protection management personnel. Increase unnecessary leakage, deteriorate the working conditions of the bag dust collector.
2) The dust-containing gas should be evenly distributed within the dust collector, preventing eddy currents from reducing the amount of gas in the corner, which causes a local low temperature and produces a problem.
3) Do a good job in the heat preservation and rainwarmed by the dust collector, pipelines. Practice has proved a good thermal insulation method, which can make the bag dust collector, the exit temperature is small, which is a useful method to prevent condensation.
4) Adopt the appropriate warming method. If a far-infrared electric heater, an electric heater is provided in the dust collector, it may be appropriately improved the horses of the host in the bag.
5) Strengthen the temperature monitoring of the dust collector and dust removal system to grasp the use of the bag dust collector to prevent condensation.
The industrial filter cloth is a highly competitive and high-risk industry. Practice has proved that whether developed countries or developing countries, the development of integrated circuit industry should adopt a centralized force, whether it is research and development or corporate production, it emphasizes cooperation rather than singing alone. Therefore, "anti-scatter" and "dispersion" are still our important work in the future.
Changzhou Xiahua Environmental Protection Technology Co., Ltd. specializes in the production and operation of industrial filtration materials for many years, mainly in the chemical industry, and the products are exported to many countries. Xiahua mainly produces the filter cloth, filter bag, pressure filter bag, etc., Xiahua filter cloth, use heart!