Filter cloth replacement method If an error occurs, it will cause the device to use it normally, allowing the professional production of the filter cloth to introduce the correct replacement method of the filter cloth.

Release pressure: Safety, make sure the nozzle is a place where it is rushing to safety. Open the exhaust valve slowly reduce the filter pressure; turn off the system: Turn off the power to stop the pump, turn off the import and export valve.

Open the cover: Make sure the filter cartridge is reduced to zero and open the cover. Throw the used filter bag, check the basket: check the arc and edges of the basket. The surface of the upper edge of the basket with the filter cartridge must be flat. Warning: If there is no nature or basket installation error will result in filtering failure;

Install a new filter bag: The filter bag must be inserted into the basket. The seal must be properly sitting in the sealing slot; check the gasket: Select the gasket that can be compatible with the fluid, replace the wear gasket using an environmentally friendly gasket; turn off the cover: Special attention. When turning off the filter cover, make sure the gasket is not distorted or leaving. Take the ring nut clockwise; turn off the exhaust valve; turn on the pump switch; open the import valve: Slowly open the valve to observe whether it is leakage, immediately close the import valve, start from 3.8; open the exit valve.

Changzhou Xiahua Environmental Protection Technology Co., Ltd. specializes in the production and operation of industrial filtration materials for many years, mainly in the chemical industry, and the products are exported to many countries. Xiahua mainly produces the filter cloth, filter bag, pressure filter bag, etc., Xiahua filter cloth, use heart!